java.lang.invoke.MethodHandles.Lookup

Enclosing class:: MethodHandles

public static final class MethodHandles.Lookup extends Object

A lookup object is a factory for creating method handles, when the creation requires access checking. Method handles do not perform access checks when they are called, but rather when they are created. Therefore, method handle access restrictions must be enforced when a method handle is created. The caller class against which those restrictions are enforced is known as the lookup class.

A lookup class which needs to create method handles will call MethodHandles.lookup to create a factory for itself. When the Lookup factory object is created, the identity of the lookup class is determined, and securely stored in the Lookup object. The lookup class (or its delegates) may then use factory methods on the Lookup object to create method handles for access-checked members. This includes all methods, constructors, and fields which are allowed to the lookup class, even private ones.

Lookup Factory Methods

The factory methods on a Lookup object correspond to all major use cases for methods, constructors, and fields. Each method handle created by a factory method is the functional equivalent of a particular bytecode behavior. (Bytecode behaviors are described in section 5.4.3.5 of the Java Virtual Machine Specification.) Here is a summary of the correspondence between these factory methods and the behavior of the resulting method handles:

lookup method behaviors
lookup expression	member	bytecode behavior
`lookup.findGetter(C.class,"f",FT.class)`	`FT f;`	`(T) this.f;`
`lookup.findStaticGetter(C.class,"f",FT.class)`	`static` `FT f;`	`(FT) C.f;`
`lookup.findSetter(C.class,"f",FT.class)`	`FT f;`	`this.f = x;`
`lookup.findStaticSetter(C.class,"f",FT.class)`	`static` `FT f;`	`C.f = arg;`
`lookup.findVirtual(C.class,"m",MT)`	`T m(A*);`	`(T) this.m(arg*);`
`lookup.findStatic(C.class,"m",MT)`	`static` `T m(A*);`	`(T) C.m(arg*);`
`lookup.findSpecial(C.class,"m",MT,this.class)`	`T m(A*);`	`(T) super.m(arg*);`
`lookup.findConstructor(C.class,MT)`	`C(A*);`	`new C(arg*);`
`lookup.unreflectGetter(aField)`	(`static`)? `FT f;`	`(FT) aField.get(thisOrNull);`
`lookup.unreflectSetter(aField)`	(`static`)? `FT f;`	`aField.set(thisOrNull, arg);`
`lookup.unreflect(aMethod)`	(`static`)? `T m(A*);`	`(T) aMethod.invoke(thisOrNull, arg*);`
`lookup.unreflectConstructor(aConstructor)`	`C(A*);`	`(C) aConstructor.newInstance(arg*);`
`lookup.unreflectSpecial(aMethod,this.class)`	`T m(A*);`	`(T) super.m(arg*);`
`lookup.findClass("C")`	`class C { ... }`	`C.class;`

Here, the type C is the class or interface being searched for a member, documented as a parameter named refc in the lookup methods. The method type MT is composed from the return type T and the sequence of argument types A*. The constructor also has a sequence of argument types A* and is deemed to return the newly-created object of type C. Both MT and the field type FT are documented as a parameter named type. The formal parameter this stands for the self-reference of type C; if it is present, it is always the leading argument to the method handle invocation. (In the case of some protected members, this may be restricted in type to the lookup class; see below.) The name arg stands for all the other method handle arguments. In the code examples for the Core Reflection API, the name thisOrNull stands for a null reference if the accessed method or field is static, and this otherwise. The names aMethod, aField, and aConstructor stand for reflective objects corresponding to the given members declared in type C.

The bytecode behavior for a findClass operation is a load of a constant class, as if by ldc CONSTANT_Class. The behavior is represented, not as a method handle, but directly as a Class constant.

In cases where the given member is of variable arity (i.e., a method or constructor) the returned method handle will also be of variable arity. In all other cases, the returned method handle will be of fixed arity.

Discussion: The equivalence between looked-up method handles and underlying class members and bytecode behaviors can break down in a few ways:

If C is not symbolically accessible from the lookup class's loader, the lookup can still succeed, even when there is no equivalent Java expression or bytecoded constant.
Likewise, if T or MT is not symbolically accessible from the lookup class's loader, the lookup can still succeed. For example, lookups for MethodHandle.invokeExact and MethodHandle.invoke will always succeed, regardless of requested type.
If there is a security manager installed, it can forbid the lookup on various grounds (see below). By contrast, the ldc instruction on a CONSTANT_MethodHandle constant is not subject to security manager checks.
If the looked-up method has a very large arity, the method handle creation may fail with an IllegalArgumentException, due to the method handle type having too many parameters.

Access checking

Access checks are applied in the factory methods of Lookup, when a method handle is created. This is a key difference from the Core Reflection API, since java.lang.reflect.Method.invoke performs access checking against every caller, on every call.

All access checks start from a Lookup object, which compares its recorded lookup class against all requests to create method handles. A single Lookup object can be used to create any number of access-checked method handles, all checked against a single lookup class.

A Lookup object can be shared with other trusted code, such as a metaobject protocol. A shared Lookup object delegates the capability to create method handles on private members of the lookup class. Even if privileged code uses the Lookup object, the access checking is confined to the privileges of the original lookup class.

A lookup can fail, because the containing class is not accessible to the lookup class, or because the desired class member is missing, or because the desired class member is not accessible to the lookup class, or because the lookup object is not trusted enough to access the member. In the case of a field setter function on a final field, finality enforcement is treated as a kind of access control, and the lookup will fail, except in special cases of Lookup.unreflectSetter. In any of these cases, a ReflectiveOperationException will be thrown from the attempted lookup. The exact class will be one of the following:

NoSuchMethodException — if a method is requested but does not exist
NoSuchFieldException — if a field is requested but does not exist
IllegalAccessException — if the member exists but an access check fails

In general, the conditions under which a method handle may be looked up for a method M are no more restrictive than the conditions under which the lookup class could have compiled, verified, and resolved a call to M. Where the JVM would raise exceptions like NoSuchMethodError, a method handle lookup will generally raise a corresponding checked exception, such as NoSuchMethodException. And the effect of invoking the method handle resulting from the lookup is exactly equivalent to executing the compiled, verified, and resolved call to M. The same point is true of fields and constructors.

Discussion: Access checks only apply to named and reflected methods, constructors, and fields. Other method handle creation methods, such as MethodHandle.asType, do not require any access checks, and are used independently of any Lookup object.

If the desired member is protected, the usual JVM rules apply, including the requirement that the lookup class must either be in the same package as the desired member, or must inherit that member. (See the Java Virtual Machine Specification, sections 4.9.2, 5.4.3.5, and 6.4.) In addition, if the desired member is a non-static field or method in a different package, the resulting method handle may only be applied to objects of the lookup class or one of its subclasses. This requirement is enforced by narrowing the type of the leading this parameter from C (which will necessarily be a superclass of the lookup class) to the lookup class itself.

The JVM imposes a similar requirement on invokespecial instruction, that the receiver argument must match both the resolved method and the current class. Again, this requirement is enforced by narrowing the type of the leading parameter to the resulting method handle. (See the Java Virtual Machine Specification, section 4.10.1.9.)

The JVM represents constructors and static initializer blocks as internal methods with special names ("<init>" and "<clinit>"). The internal syntax of invocation instructions allows them to refer to such internal methods as if they were normal methods, but the JVM bytecode verifier rejects them. A lookup of such an internal method will produce a NoSuchMethodException.

If the relationship between nested types is expressed directly through the NestHost and NestMembers attributes (see the Java Virtual Machine Specification, sections 4.7.28 and 4.7.29), then the associated Lookup object provides direct access to the lookup class and all of its nestmates (see Class.getNestHost). Otherwise, access between nested classes is obtained by the Java compiler creating a wrapper method to access a private method of another class in the same nest. For example, a nested class C.D can access private members within other related classes such as C, C.D.E, or C.B, but the Java compiler may need to generate wrapper methods in those related classes. In such cases, a Lookup object on C.E would be unable to access those private members. A workaround for this limitation is the Lookup.in method, which can transform a lookup on C.E into one on any of those other classes, without special elevation of privilege.

The accesses permitted to a given lookup object may be limited, according to its set of lookupModes, to a subset of members normally accessible to the lookup class. For example, the publicLookup method produces a lookup object which is only allowed to access public members in public classes of exported packages. The caller sensitive method lookup produces a lookup object with full capabilities relative to its caller class, to emulate all supported bytecode behaviors. Also, the Lookup.in method may produce a lookup object with fewer access modes than the original lookup object.

Discussion of private and module access: We say that a lookup has private access if its lookup modes include the possibility of accessing private members (which includes the private members of nestmates). As documented in the relevant methods elsewhere, only lookups with private access possess the following capabilities:

access private fields, methods, and constructors of the lookup class and its nestmates
create method handles which emulate invokespecial instructions
avoid package access checks for classes accessible to the lookup class
create delegated lookup objects which have private access to other classes within the same package member

Similarly, a lookup with module access ensures that the original lookup creator was a member in the same module as the lookup class.

Private and module access are independently determined modes; a lookup may have either or both or neither. A lookup which possesses both access modes is said to possess full privilege access.

A lookup with original access ensures that this lookup is created by the original lookup class and the bootstrap method invoked by the VM. Such a lookup with original access also has private and module access which has the following additional capability:

create method handles which invoke caller sensitive methods, such as Class.forName
obtain the class data associated with the lookup class

Each of these permissions is a consequence of the fact that a lookup object with private access can be securely traced back to an originating class, whose bytecode behaviors and Java language access permissions can be reliably determined and emulated by method handles.

Cross-module lookups

When a lookup class in one module M1 accesses a class in another module M2, extra access checking is performed beyond the access mode bits. A Lookup with PUBLIC mode and a lookup class in M1 can access public types in M2 when M2 is readable to M1 and when the type is in a package of M2 that is exported to at least M1.

A Lookup on C can also teleport to a target class via Lookup.in and MethodHandles.privateLookupIn methods. Teleporting across modules will always record the original lookup class as the previous lookup class and drops MODULE access. If the target class is in the same module as the lookup class C, then the target class becomes the new lookup class and there is no change to the previous lookup class. If the target class is in a different module from M1 (C's module), C becomes the new previous lookup class and the target class becomes the new lookup class. In that case, if there was already a previous lookup class in M0, and it differs from M1 and M2, then the resulting lookup drops all privileges. For example,

Lookup lookup = MethodHandles.lookup();   // in class C
Lookup lookup2 = lookup.in(D.class);
MethodHandle mh = lookup2.findStatic(E.class, "m", MT);

The MethodHandles.lookup() factory method produces a Lookup object with null previous lookup class. lookup.in(D.class) transforms the lookup on class C to class D without elevation of privileges. If C and D are in the same module, lookup2 records D as the new lookup class and keeps the same previous lookup class as the original lookup, or null if not present.

When a Lookup teleports from a class in one nest to another nest, PRIVATE access is dropped. When a Lookup teleports from a class in one package to another package, PACKAGE access is dropped. When a Lookup teleports from a class in one module to another module, MODULE access is dropped. Teleporting across modules drops the ability to access non-exported classes in both the module of the new lookup class and the module of the old lookup class and the resulting Lookup remains only PUBLIC access. A Lookup can teleport back and forth to a class in the module of the lookup class and the module of the previous class lookup. Teleporting across modules can only decrease access but cannot increase it. Teleporting to some third module drops all accesses.

In the above example, if C and D are in different modules, lookup2 records D as its lookup class and C as its previous lookup class and lookup2 has only PUBLIC access. lookup2 can teleport to other class in C's module and D's module. If class E is in a third module, lookup2.in(E.class) creates a Lookup on E with no access and lookup2's lookup class D is recorded as its previous lookup class.

Teleporting across modules restricts access to the public types that both the lookup class and the previous lookup class can equally access (see below).

MethodHandles.privateLookupIn(T.class, lookup) can be used to teleport a lookup from class C to class T and produce a new Lookup with private access if the lookup class is allowed to do deep reflection on T. The lookup must have MODULE and PRIVATE access to call privateLookupIn. A lookup on C in module M1 is allowed to do deep reflection on all classes in M1. If T is in M1, privateLookupIn produces a new Lookup on T with full capabilities. A lookup on C is also allowed to do deep reflection on T in another module M2 if M1 reads M2 and M2 opens the package containing T to at least M1. T becomes the new lookup class and C becomes the new previous lookup class and MODULE access is dropped from the resulting Lookup. The resulting Lookup can be used to do member lookup or teleport to another lookup class by calling Lookup::in. But it cannot be used to obtain another private Lookup by calling privateLookupIn because it has no MODULE access.

The Lookup object returned by privateLookupIn is allowed to define classes in the runtime package of T. Extreme caution should be taken when opening a package to another module as such defined classes have the same full privilege access as other members in M2.

Cross-module access checks

A Lookup with PUBLIC or with UNCONDITIONAL mode allows cross-module access. The access checking is performed with respect to both the lookup class and the previous lookup class if present.

A Lookup with UNCONDITIONAL mode can access public type in all modules when the type is in a package that is exported unconditionally.

If a Lookup on LC in M1 has no previous lookup class, the lookup with PUBLIC mode can access all public types in modules that are readable to M1 and the type is in a package that is exported at least to M1.

If a Lookup on LC in M1 has a previous lookup class PLC on M0, the lookup with PUBLIC mode can access the intersection of all public types that are accessible to M1 with all public types that are accessible to M0. M0 reads M1 and hence the set of accessible types includes:

unconditional-exported packages from M1
unconditional-exported packages from M0 if M1 reads M0
unconditional-exported packages from a third module M2if both M0 and M1 read M2
qualified-exported packages from M1 to M0
qualified-exported packages from M0 to M1 if M1 reads M0
qualified-exported packages from a third module M2 to both M0 and M1 if both M0 and M1 read M2

Access modes

The table below shows the access modes of a Lookup produced by any of the following factory or transformation methods:

Access mode summary
Lookup object	original	protected	private	package	module	public
`CL = MethodHandles.lookup()` in `C`	ORI	PRO	PRI	PAC	MOD	1R
`CL.in(C1)` same package				PAC	MOD	1R
`CL.in(C1)` same module					MOD	1R
`CL.in(D)` different module						2R
`CL.in(D).in(C)` hop back to module						2R
`PRI1 = privateLookupIn(C1,CL)`		PRO	PRI	PAC	MOD	1R
`PRI1a = privateLookupIn(C,PRI1)`		PRO	PRI	PAC	MOD	1R
`PRI1.in(C1)` same package				PAC	MOD	1R
`PRI1.in(C1)` different package					MOD	1R
`PRI1.in(D)` different module						2R
`PRI1.dropLookupMode(PROTECTED)`			PRI	PAC	MOD	1R
`PRI1.dropLookupMode(PRIVATE)`				PAC	MOD	1R
`PRI1.dropLookupMode(PACKAGE)`					MOD	1R
`PRI1.dropLookupMode(MODULE)`						1R
`PRI1.dropLookupMode(PUBLIC)`						none
`PRI2 = privateLookupIn(D,CL)`		PRO	PRI	PAC		2R
`privateLookupIn(D,PRI1)`		PRO	PRI	PAC		2R
`privateLookupIn(C,PRI2)` fails						IAE
`PRI2.in(D2)` same package				PAC		2R
`PRI2.in(D2)` different package						2R
`PRI2.in(C1)` hop back to module						2R
`PRI2.in(E)` hop to third module						none
`PRI2.dropLookupMode(PROTECTED)`			PRI	PAC		2R
`PRI2.dropLookupMode(PRIVATE)`				PAC		2R
`PRI2.dropLookupMode(PACKAGE)`						2R
`PRI2.dropLookupMode(MODULE)`						2R
`PRI2.dropLookupMode(PUBLIC)`						none
`CL.dropLookupMode(PROTECTED)`			PRI	PAC	MOD	1R
`CL.dropLookupMode(PRIVATE)`				PAC	MOD	1R
`CL.dropLookupMode(PACKAGE)`					MOD	1R
`CL.dropLookupMode(MODULE)`						1R
`CL.dropLookupMode(PUBLIC)`						none
`PUB = publicLookup()`						U
`PUB.in(D)` different module						U
`PUB.in(D).in(E)` third module						U
`PUB.dropLookupMode(UNCONDITIONAL)`						none
`privateLookupIn(C1,PUB)` fails						IAE
`ANY.in(X)`, for inaccessible `X`						none

Notes:

Class C and class C1 are in module M1, but D and D2 are in module M2, and E is in module M3. X stands for class which is inaccessible to the lookup. ANY stands for any of the example lookups.
ORI indicates ORIGINAL bit set, PRO indicates PROTECTED bit set, PRI indicates PRIVATE bit set, PAC indicates PACKAGE bit set, MOD indicates MODULE bit set, 1R and 2R indicate PUBLIC bit set, U indicates UNCONDITIONAL bit set, IAE indicates IllegalAccessException thrown.
Public access comes in three kinds:
- unconditional (U): the lookup assumes readability. The lookup has null previous lookup class.
- one-module-reads (1R): the module access checking is performed with respect to the lookup class. The lookup has null previous lookup class.
- two-module-reads (2R): the module access checking is performed with respect to the lookup class and the previous lookup class. The lookup has a non-null previous lookup class which is in a different module from the current lookup class.
Any attempt to reach a third module loses all access.
If a target class X is not accessible to Lookup::in all access modes are dropped.

Security manager interactions

Although bytecode instructions can only refer to classes in a related class loader, this API can search for methods in any class, as long as a reference to its Class object is available. Such cross-loader references are also possible with the Core Reflection API, and are impossible to bytecode instructions such as invokestatic or getfield. There is a security manager API to allow applications to check such cross-loader references. These checks apply to both the MethodHandles.Lookup API and the Core Reflection API (as found on Class).

If a security manager is present, member and class lookups are subject to additional checks. From one to three calls are made to the security manager. Any of these calls can refuse access by throwing a SecurityException. Define smgr as the security manager, lookc as the lookup class of the current lookup object, refc as the containing class in which the member is being sought, and defc as the class in which the member is actually defined. (If a class or other type is being accessed, the refc and defc values are the class itself.) The value lookc is defined as not present if the current lookup object does not have full privilege access. The calls are made according to the following rules:

Step 1: If lookc is not present, or if its class loader is not the same as or an ancestor of the class loader of refc, then smgr.checkPackageAccess(refcPkg) is called, where refcPkg is the package of refc.
Step 2a: If the retrieved member is not public and lookc is not present, then smgr.checkPermission with RuntimePermission("accessDeclaredMembers") is called.
Step 2b: If the retrieved class has a null class loader, and lookc is not present, then smgr.checkPermission with RuntimePermission("getClassLoader") is called.
Step 3: If the retrieved member is not public, and if lookc is not present, and if defc and refc are different, then smgr.checkPackageAccess(defcPkg) is called, where defcPkg is the package of defc.

Security checks are performed after other access checks have passed. Therefore, the above rules presuppose a member or class that is public, or else that is being accessed from a lookup class that has rights to access the member or class.

If a security manager is present and the current lookup object does not have full privilege access, then defineClass, defineHiddenClass, defineHiddenClassWithClassData calls smgr.checkPermission with RuntimePermission("defineClass").

Caller sensitive methods

A small number of Java methods have a special property called caller sensitivity. A caller-sensitive method can behave differently depending on the identity of its immediate caller.

If a method handle for a caller-sensitive method is requested, the general rules for bytecode behaviors apply, but they take account of the lookup class in a special way. The resulting method handle behaves as if it were called from an instruction contained in the lookup class, so that the caller-sensitive method detects the lookup class. (By contrast, the invoker of the method handle is disregarded.) Thus, in the case of caller-sensitive methods, different lookup classes may give rise to differently behaving method handles.

In cases where the lookup object is publicLookup(), or some other lookup object without the original access, the lookup class is disregarded. In such cases, no caller-sensitive method handle can be created, access is forbidden, and the lookup fails with an IllegalAccessException.

Discussion: For example, the caller-sensitive method Class.forName(x) can return varying classes or throw varying exceptions, depending on the class loader of the class that calls it. A public lookup of Class.forName will fail, because there is no reasonable way to determine its bytecode behavior.

If an application caches method handles for broad sharing, it should use publicLookup() to create them. If there is a lookup of Class.forName, it will fail, and the application must take appropriate action in that case. It may be that a later lookup, perhaps during the invocation of a bootstrap method, can incorporate the specific identity of the caller, making the method accessible.

The function MethodHandles.lookup is caller sensitive so that there can be a secure foundation for lookups. Nearly all other methods in the JSR 292 API rely on lookup objects to check access requests.

Since:: 1.7

Nested Class Summary

Nested Classes

Modifier and Type

Class

Description

static enum

MethodHandles.Lookup.ClassOption

The set of class options that specify whether a hidden class created by Lookup::defineHiddenClass method is dynamically added as a new member to the nest of a lookup class and/or whether a hidden class has a strong relationship with the class loader marked as its defining loader.
Field Summary

Fields

Modifier and Type

Field

Description

static final int

MODULE

A single-bit mask representing module access, which may contribute to the result of lookupModes.

static final int

ORIGINAL

A single-bit mask representing original access which may contribute to the result of lookupModes.

static final int

PACKAGE

A single-bit mask representing package access (default access), which may contribute to the result of lookupModes.

static final int

PRIVATE

A single-bit mask representing private access, which may contribute to the result of lookupModes.

static final int

PROTECTED

A single-bit mask representing protected access, which may contribute to the result of lookupModes.

static final int

PUBLIC

A single-bit mask representing public access, which may contribute to the result of lookupModes.

static final int

UNCONDITIONAL

A single-bit mask representing unconditional access which may contribute to the result of lookupModes.
Method Summary

Modifier and Type

Method

Description

<T> Class<T>

accessClass(Class<T> targetClass)

Determines if a class can be accessed from the lookup context defined by this Lookup object.

MethodHandle

bind(Object receiver, String name, MethodType type)

Produces an early-bound method handle for a non-static method.

Class<?>

defineClass(byte[] bytes)

Creates and links a class or interface from bytes with the same class loader and in the same runtime package and protection domain as this lookup's lookup class as if calling ClassLoader::defineClass.

MethodHandles.Lookup

defineHiddenClass(byte[] bytes, boolean initialize, MethodHandles.Lookup.ClassOption... options)

Creates a hidden class or interface from bytes, returning a Lookup on the newly created class or interface.

MethodHandles.Lookup

defineHiddenClassWithClassData(byte[] bytes, Object classData, boolean initialize, MethodHandles.Lookup.ClassOption... options)

Creates a hidden class or interface from bytes with associated class data, returning a Lookup on the newly created class or interface.

MethodHandles.Lookup

dropLookupMode(int modeToDrop)

Creates a lookup on the same lookup class which this lookup object finds members, but with a lookup mode that has lost the given lookup mode.

<T> Class<T>

ensureInitialized(Class<T> targetClass)

Ensures that targetClass has been initialized.

Class<?>

findClass(String targetName)

Looks up a class by name from the lookup context defined by this Lookup object, as if resolved by an ldc instruction.

MethodHandle

findConstructor(Class<?> refc, MethodType type)

Produces a method handle which creates an object and initializes it, using the constructor of the specified type.

MethodHandle

findGetter(Class<?> refc, String name, Class<?> type)

Produces a method handle giving read access to a non-static field.

MethodHandle

findSetter(Class<?> refc, String name, Class<?> type)

Produces a method handle giving write access to a non-static field.

MethodHandle

findSpecial(Class<?> refc, String name, MethodType type, Class<?> specialCaller)

Produces an early-bound method handle for a virtual method.

MethodHandle

findStatic(Class<?> refc, String name, MethodType type)

Produces a method handle for a static method.

MethodHandle

findStaticGetter(Class<?> refc, String name, Class<?> type)

Produces a method handle giving read access to a static field.

MethodHandle

findStaticSetter(Class<?> refc, String name, Class<?> type)

Produces a method handle giving write access to a static field.

VarHandle

findStaticVarHandle(Class<?> decl, String name, Class<?> type)

Produces a VarHandle giving access to a static field name of type type declared in a class of type decl.

VarHandle

findVarHandle(Class<?> recv, String name, Class<?> type)

Produces a VarHandle giving access to a non-static field name of type type declared in a class of type recv.

MethodHandle

findVirtual(Class<?> refc, String name, MethodType type)

Produces a method handle for a virtual method.

boolean

hasFullPrivilegeAccess()

Returns true if this lookup has full privilege access, i.e.

boolean

hasPrivateAccess()

Deprecated.
This method was originally designed to test PRIVATE access that implies full privilege access but MODULE access has since become independent of PRIVATE access.

MethodHandles.Lookup

in(Class<?> requestedLookupClass)

Creates a lookup on the specified new lookup class.

Class<?>

lookupClass()

Tells which class is performing the lookup.

int

lookupModes()

Tells which access-protection classes of members this lookup object can produce.

Class<?>

previousLookupClass()

Reports a lookup class in another module that this lookup object was previously teleported from, or null.

MethodHandleInfo

revealDirect(MethodHandle target)

Cracks a direct method handle created by this lookup object or a similar one.

String

toString()

Displays the name of the class from which lookups are to be made, followed by "/" and the name of the previous lookup class if present.

MethodHandle

unreflect(Method m)

Makes a direct method handle to m, if the lookup class has permission.

MethodHandle

unreflectConstructor(Constructor<?> c)

Produces a method handle for a reflected constructor.

MethodHandle

unreflectGetter(Field f)

Produces a method handle giving read access to a reflected field.

MethodHandle

unreflectSetter(Field f)

Produces a method handle giving write access to a reflected field.

MethodHandle

unreflectSpecial(Method m, Class<?> specialCaller)

Produces a method handle for a reflected method.

VarHandle

unreflectVarHandle(Field f)

Produces a VarHandle giving access to a reflected field f of type T declared in a class of type R.

Methods declared in class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Field Details
- PUBLIC
  public static final int PUBLIC
  
  A single-bit mask representing public access, which may contribute to the result of lookupModes. The value, 0x01, happens to be the same as the value of the public modifier bit.
  A Lookup with this lookup mode performs cross-module access check with respect to the lookup class and previous lookup class if present.
  
  See Also:
  
  Constant Field Values
- PRIVATE
  public static final int PRIVATE
  
  A single-bit mask representing private access, which may contribute to the result of lookupModes. The value, 0x02, happens to be the same as the value of the private modifier bit.
  
  See Also:
  
  Constant Field Values
- PROTECTED
  public static final int PROTECTED
  
  A single-bit mask representing protected access, which may contribute to the result of lookupModes. The value, 0x04, happens to be the same as the value of the protected modifier bit.
  
  See Also:
  
  Constant Field Values
- PACKAGE
  public static final int PACKAGE
  
  A single-bit mask representing package access (default access), which may contribute to the result of lookupModes. The value is 0x08, which does not correspond meaningfully to any particular modifier bit.
  
  See Also:
  
  Constant Field Values
- MODULE
  public static final int MODULE
  
  A single-bit mask representing module access, which may contribute to the result of lookupModes. The value is 0x10, which does not correspond meaningfully to any particular modifier bit. In conjunction with the PUBLIC modifier bit, a Lookup with this lookup mode can access all public types in the module of the lookup class and public types in packages exported by other modules to the module of the lookup class.
  If this lookup mode is set, the previous lookup class is always null.
  
  Since:
  
  9
  
  See Also:
  
  Constant Field Values
- UNCONDITIONAL
  public static final int UNCONDITIONAL
  
  A single-bit mask representing unconditional access which may contribute to the result of lookupModes. The value is 0x20, which does not correspond meaningfully to any particular modifier bit. A Lookup with this lookup mode assumes readability. This lookup mode can access all public members of public types of all modules when the type is in a package that is exported unconditionally.
  If this lookup mode is set, the previous lookup class is always null.
  
  Since:
  
  9
  
  See Also:
  
  MethodHandles.publicLookup()
  
  Constant Field Values
- ORIGINAL
  public static final int ORIGINAL
  
  A single-bit mask representing original access which may contribute to the result of lookupModes. The value is 0x40, which does not correspond meaningfully to any particular modifier bit.
  If this lookup mode is set, the Lookup object must be created by the original lookup class by calling MethodHandles.lookup() method or by a bootstrap method invoked by the VM. The Lookup object with this lookup mode has full privilege access.
  
  Since:
  
  16
  
  See Also:
  
  Constant Field Values
Method Details
- lookupClass
  public Class<?> lookupClass()
  
  Tells which class is performing the lookup. It is this class against which checks are performed for visibility and access permissions.
  If this lookup object has a previous lookup class, access checks are performed against both the lookup class and the previous lookup class.
  The class implies a maximum level of access permission, but the permissions may be additionally limited by the bitmask lookupModes, which controls whether non-public members can be accessed.
  
  Returns:
  
  the lookup class, on behalf of which this lookup object finds members
  
  See Also:
  
  Cross-module lookups
- previousLookupClass
  public Class<?> previousLookupClass()
  
  Reports a lookup class in another module that this lookup object was previously teleported from, or null.
  A Lookup object produced by the factory methods, such as the lookup() and publicLookup() method, has null previous lookup class. A Lookup object has a non-null previous lookup class when this lookup was teleported from an old lookup class in one module to a new lookup class in another module.
  
  Returns:
  
  the lookup class in another module that this lookup object was previously teleported from, or null
  
  Since:
  
  14
  
  See Also:
  
  in(Class)
  
  MethodHandles.privateLookupIn(Class, Lookup)
  
  Cross-module lookups
- lookupModes
  public int lookupModes()
  
  Tells which access-protection classes of members this lookup object can produce. The result is a bit-mask of the bits PUBLIC (0x01), PRIVATE (0x02), PROTECTED (0x04), PACKAGE (0x08), MODULE (0x10), UNCONDITIONAL (0x20), and ORIGINAL (0x40).
  A freshly-created lookup object on the caller's class has all possible bits set, except UNCONDITIONAL. A lookup object on a new lookup class created from a previous lookup object may have some mode bits set to zero. Mode bits can also be directly cleared. Once cleared, mode bits cannot be restored from the downgraded lookup object. The purpose of this is to restrict access via the new lookup object, so that it can access only names which can be reached by the original lookup object, and also by the new lookup class.
  
  Returns:
  
  the lookup modes, which limit the kinds of access performed by this lookup object
  
  See Also:
  
  in(java.lang.Class<?>)
  
  dropLookupMode(int)
- in
  public MethodHandles.Lookup in(Class<?> requestedLookupClass)
  
  Creates a lookup on the specified new lookup class. The resulting object will report the specified class as its own lookupClass.
  However, the resulting Lookup object is guaranteed to have no more access capabilities than the original. In particular, access capabilities can be lost as follows:
  
  If the new lookup class is different from the old lookup class, i.e. ORIGINAL access is lost.
  If the new lookup class is in a different module from the old one, i.e. MODULE access is lost.
  If the new lookup class is in a different package than the old one, protected and default (package) members will not be accessible, i.e. PROTECTED and PACKAGE access are lost.
  If the new lookup class is not within the same package member as the old one, private members will not be accessible, and protected members will not be accessible by virtue of inheritance, i.e. PRIVATE access is lost. (Protected members may continue to be accessible because of package sharing.)
  If the new lookup class is not accessible to this lookup, then no members, not even public members, will be accessible i.e. all access modes are lost.
  If the new lookup class, the old lookup class and the previous lookup class are all in different modules i.e. teleporting to a third module, all access modes are lost.
  
  The new previous lookup class is chosen as follows:
  
  If the new lookup object has UNCONDITIONAL bit, the new previous lookup class is null.
  If the new lookup class is in the same module as the old lookup class, the new previous lookup class is the old previous lookup class.
  If the new lookup class is in a different module from the old lookup class, the new previous lookup class is the old lookup class.
  
  The resulting lookup's capabilities for loading classes (used during findClass(java.lang.String) invocations) are determined by the lookup class' loader, which may change due to this operation.
  
  Parameters:
  
  requestedLookupClass - the desired lookup class for the new lookup object
  
  Returns:
  
  a lookup object which reports the desired lookup class, or the same object if there is no change
  
  Throws:
  
  IllegalArgumentException - if requestedLookupClass is a primitive type or void or array class
  
  NullPointerException - if the argument is null
  
  See Also:
  
  accessClass(Class)
  
  Cross-module lookups
- dropLookupMode
  public MethodHandles.Lookup dropLookupMode(int modeToDrop)
  
  Creates a lookup on the same lookup class which this lookup object finds members, but with a lookup mode that has lost the given lookup mode. The lookup mode to drop is one of PUBLIC, MODULE, PACKAGE, PROTECTED, PRIVATE, ORIGINAL, or UNCONDITIONAL.
  If this lookup is a public lookup, this lookup has UNCONDITIONAL mode set and it has no other mode set. When dropping UNCONDITIONAL on a public lookup then the resulting lookup has no access.
  If this lookup is not a public lookup, then the following applies regardless of its lookup modes. PROTECTED and ORIGINAL are always dropped and so the resulting lookup mode will never have these access capabilities. When dropping PACKAGE then the resulting lookup will not have PACKAGE or PRIVATE access. When dropping MODULE then the resulting lookup will not have MODULE, PACKAGE, or PRIVATE access. When dropping PUBLIC then the resulting lookup has no access.
  
  API Note:
  
  A lookup with PACKAGE but not PRIVATE mode can safely delegate non-public access within the package of the lookup class without conferring private access. A lookup with MODULE but not PACKAGE mode can safely delegate PUBLIC access within the module of the lookup class without conferring package access. A lookup with a previous lookup class (and PUBLIC but not MODULE mode) can safely delegate access to public classes accessible to both the module of the lookup class and the module of the previous lookup class.
  
  Parameters:
  
  modeToDrop - the lookup mode to drop
  
  Returns:
  
  a lookup object which lacks the indicated mode, or the same object if there is no change
  
  Throws:
  
  IllegalArgumentException - if modeToDrop is not one of PUBLIC, MODULE, PACKAGE, PROTECTED, PRIVATE, ORIGINAL or UNCONDITIONAL
  
  Since:
  
  9
  
  See Also:
  
  MethodHandles.privateLookupIn(java.lang.Class<?>, java.lang.invoke.MethodHandles.Lookup)
- defineClass
  public Class<?> defineClass(byte[] bytes) throws IllegalAccessException
  
  Creates and links a class or interface from bytes with the same class loader and in the same runtime package and protection domain as this lookup's lookup class as if calling ClassLoader::defineClass.
  The lookup modes for this lookup must include PACKAGE access as default (package) members will be accessible to the class. The PACKAGE lookup mode serves to authenticate that the lookup object was created by a caller in the runtime package (or derived from a lookup originally created by suitably privileged code to a target class in the runtime package).
  
  The bytes parameter is the class bytes of a valid class file (as defined by the The Java Virtual Machine Specification) with a class name in the same package as the lookup class.
  
  This method does not run the class initializer. The class initializer may run at a later time, as detailed in section 12.4 of the The Java Language Specification.
  
  If there is a security manager and this lookup does not have full privilege access, its checkPermission method is first called to check RuntimePermission("defineClass").
  
  Parameters:
  
  bytes - the class bytes
  
  Returns:
  
  the Class object for the class
  
  Throws:
  
  IllegalAccessException - if this lookup does not have PACKAGE access
  
  ClassFormatError - if bytes is not a ClassFile structure
  
  IllegalArgumentException - if bytes denotes a class in a different package than the lookup class or bytes is not a class or interface (ACC_MODULE flag is set in the value of the access_flags item)
  
  VerifyError - if the newly created class cannot be verified
  
  LinkageError - if the newly created class cannot be linked for any other reason
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if bytes is null
  
  Since:
  
  9
  
  See Also:
  
  MethodHandles.privateLookupIn(java.lang.Class<?>, java.lang.invoke.MethodHandles.Lookup)
  
  dropLookupMode(int)
  
  ClassLoader.defineClass(String,byte[],int,int,ProtectionDomain)
- defineHiddenClass
  public MethodHandles.Lookup defineHiddenClass(byte[] bytes, boolean initialize, MethodHandles.Lookup.ClassOption... options) throws IllegalAccessException
  
  Creates a hidden class or interface from bytes, returning a Lookup on the newly created class or interface.
  Ordinarily, a class or interface C is created by a class loader, which either defines C directly or delegates to another class loader. A class loader defines C directly by invoking ClassLoader::defineClass, which causes the Java Virtual Machine to derive C from a purported representation in class file format. In situations where use of a class loader is undesirable, a class or interface C can be created by this method instead. This method is capable of defining C, and thereby creating it, without invoking ClassLoader::defineClass. Instead, this method defines C as if by arranging for the Java Virtual Machine to derive a nonarray class or interface C from a purported representation in class file format using the following rules:
  
  The lookup modes for this Lookup must include full privilege access. This level of access is needed to create C in the module of the lookup class of this Lookup.
  
  The purported representation in bytes must be a ClassFile structure (JVMS 4.1) of a supported major and minor version. The major and minor version may differ from the class file version of the lookup class of this Lookup.
  
  The value of this_class must be a valid index in the constant_pool table, and the entry at that index must be a valid CONSTANT_Class_info structure. Let N be the binary name encoded in internal form that is specified by this structure. N must denote a class or interface in the same package as the lookup class.
  
  Let CN be the string N + "." + <suffix>, where <suffix> is an unqualified name.
  Let newBytes be the ClassFile structure given by bytes with an additional entry in the constant_pool table, indicating a CONSTANT_Utf8_info structure for CN, and where the CONSTANT_Class_info structure indicated by this_class refers to the new CONSTANT_Utf8_info structure.
  Let L be the defining class loader of the lookup class of this Lookup.
  C is derived with name CN, class loader L, and purported representation newBytes as if by the rules of JVMS 5.3.5, with the following adjustments:
  
  The constant indicated by this_class is permitted to specify a name that includes a single "." character, even though this is not a valid binary class or interface name in internal form.
  
  The Java Virtual Machine marks L as the defining class loader of C, but no class loader is recorded as an initiating class loader of C.
  
  C is considered to have the same runtime package, module and protection domain as the lookup class of this Lookup.
  Let GN be the binary name obtained by taking N (a binary name encoded in internal form) and replacing ASCII forward slashes with ASCII periods. For the instance of Class representing C:
  
  Class.getName() returns the string GN + "/" + <suffix>, even though this is not a valid binary class or interface name.
  
  Class.descriptorString() returns the string "L" + N + "." + <suffix> + ";", even though this is not a valid type descriptor name.
  
  Class.describeConstable() returns an empty optional as C cannot be described in nominal form.
  
  After C is derived, it is linked by the Java Virtual Machine. Linkage occurs as specified in JVMS 5.4.3, with the following adjustments:
  
  During verification, whenever it is necessary to load the class named CN, the attempt succeeds, producing class C. No request is made of any class loader.
  
  On any attempt to resolve the entry in the run-time constant pool indicated by this_class, the symbolic reference is considered to be resolved to C and resolution always succeeds immediately.
  
  If the initialize parameter is true, then C is initialized by the Java Virtual Machine.
  The newly created class or interface C serves as the lookup class of the Lookup object returned by this method. C is hidden in the sense that no other class or interface can refer to C via a constant pool entry. That is, a hidden class or interface cannot be named as a supertype, a field type, a method parameter type, or a method return type by any other class. This is because a hidden class or interface does not have a binary name, so there is no internal form available to record in any class's constant pool. A hidden class or interface is not discoverable by Class.forName(String, boolean, ClassLoader), ClassLoader.loadClass(String, boolean), or findClass(String), and is not modifiable by Java agents or tool agents using the JVM Tool Interface.
  A class or interface created by a class loader has a strong relationship with that class loader. That is, every Class object contains a reference to the ClassLoader that defined it. This means that a class created by a class loader may be unloaded if and only if its defining loader is not reachable and thus may be reclaimed by a garbage collector (JLS 12.7). By default, however, a hidden class or interface may be unloaded even if the class loader that is marked as its defining loader is reachable. This behavior is useful when a hidden class or interface serves multiple classes defined by arbitrary class loaders. In other cases, a hidden class or interface may be linked to a single class (or a small number of classes) with the same defining loader as the hidden class or interface. In such cases, where the hidden class or interface must be coterminous with a normal class or interface, the STRONG option may be passed in options. This arranges for a hidden class to have the same strong relationship with the class loader marked as its defining loader, as a normal class or interface has with its own defining loader. If STRONG is not used, then the invoker of defineHiddenClass may still prevent a hidden class or interface from being unloaded by ensuring that the Class object is reachable.
  The unloading characteristics are set for each hidden class when it is defined, and cannot be changed later. An advantage of allowing hidden classes to be unloaded independently of the class loader marked as their defining loader is that a very large number of hidden classes may be created by an application. In contrast, if STRONG is used, then the JVM may run out of memory, just as if normal classes were created by class loaders.
  Classes and interfaces in a nest are allowed to have mutual access to their private members. The nest relationship is determined by the NestHost attribute (JVMS 4.7.28) and the NestMembers attribute (JVMS 4.7.29) in a class file. By default, a hidden class belongs to a nest consisting only of itself because a hidden class has no binary name. The NESTMATE option can be passed in options to create a hidden class or interface C as a member of a nest. The nest to which C belongs is not based on any NestHost attribute in the ClassFile structure from which C was derived. Instead, the following rules determine the nest host of C:
  
  If the nest host of the lookup class of this Lookup has previously been determined, then let H be the nest host of the lookup class. Otherwise, the nest host of the lookup class is determined using the algorithm in JVMS 5.4.4, yielding H.
  
  The nest host of C is determined to be H, the nest host of the lookup class.
  
  A hidden class or interface may be serializable, but this requires a custom serialization mechanism in order to ensure that instances are properly serialized and deserialized. The default serialization mechanism supports only classes and interfaces that are discoverable by their class name.
  
  Parameters:
  
  bytes - the bytes that make up the class data, in the format of a valid class file as defined by The Java Virtual Machine Specification.
  
  initialize - if true the class will be initialized.
  
  options - class options
  
  Returns:
  
  the Lookup object on the hidden class, with original and full privilege access
  
  Throws:
  
  IllegalAccessException - if this Lookup does not have full privilege access
  
  SecurityException - if a security manager is present and it refuses access
  
  ClassFormatError - if bytes is not a ClassFile structure
  
  UnsupportedClassVersionError - if bytes is not of a supported major or minor version
  
  IllegalArgumentException - if bytes denotes a class in a different package than the lookup class or bytes is not a class or interface (ACC_MODULE flag is set in the value of the access_flags item)
  
  IncompatibleClassChangeError - if the class or interface named as the direct superclass of C is in fact an interface, or if any of the classes or interfaces named as direct superinterfaces of C are not in fact interfaces
  
  ClassCircularityError - if any of the superclasses or superinterfaces of C is C itself
  
  VerifyError - if the newly created class cannot be verified
  
  LinkageError - if the newly created class cannot be linked for any other reason
  
  NullPointerException - if any parameter is null
  
  See Java Language Specification:
  
  12.7 Unloading of Classes and Interfaces
  See Java Virtual Machine Specification:
  
  4.2.1 Binary Class and Interface Names
  4.2.2 Unqualified Names
  4.7.28 The NestHost Attribute
  4.7.29 The NestMembers Attribute
  5.4.3.1 Class and Interface Resolution
  5.4.4 Access Control
  5.3.5 Deriving a Class from a class File Representation
  5.4 Linking
  5.5 Initialization
  
  Since:
  
  15
  
  See Also:
  
  Class.isHidden()
- defineHiddenClassWithClassData
  public MethodHandles.Lookup defineHiddenClassWithClassData(byte[] bytes, Object classData, boolean initialize, MethodHandles.Lookup.ClassOption... options) throws IllegalAccessException
  
  Creates a hidden class or interface from bytes with associated class data, returning a Lookup on the newly created class or interface.
  This method is equivalent to calling defineHiddenClass(bytes, initialize, options) as if the hidden class is injected with a private static final unnamed field which is initialized with the given classData at the first instruction of the class initializer. The newly created class is linked by the Java Virtual Machine.
  The MethodHandles::classData and MethodHandles::classDataAt methods can be used to retrieve the classData.
  
  API Note:
  
  A framework can create a hidden class with class data with one or more objects and load the class data as dynamically-computed constant(s) via a bootstrap method. Class data is accessible only to the lookup object created by the newly defined hidden class but inaccessible to other members in the same nest (unlike private static fields that are accessible to nestmates). Care should be taken w.r.t. mutability for example when passing an array or other mutable structure through the class data. Changing any value stored in the class data at runtime may lead to unpredictable behavior. If the class data is a List, it is good practice to make it unmodifiable for example via List::of.
  
  Parameters:
  
  bytes - the class bytes
  
  classData - pre-initialized class data
  
  initialize - if true the class will be initialized.
  
  options - class options
  
  Returns:
  
  the Lookup object on the hidden class, with original and full privilege access
  
  Throws:
  
  IllegalAccessException - if this Lookup does not have full privilege access
  
  SecurityException - if a security manager is present and it refuses access
  
  ClassFormatError - if bytes is not a ClassFile structure
  
  UnsupportedClassVersionError - if bytes is not of a supported major or minor version
  
  IllegalArgumentException - if bytes denotes a class in a different package than the lookup class or bytes is not a class or interface (ACC_MODULE flag is set in the value of the access_flags item)
  
  IncompatibleClassChangeError - if the class or interface named as the direct superclass of C is in fact an interface, or if any of the classes or interfaces named as direct superinterfaces of C are not in fact interfaces
  
  ClassCircularityError - if any of the superclasses or superinterfaces of C is C itself
  
  VerifyError - if the newly created class cannot be verified
  
  LinkageError - if the newly created class cannot be linked for any other reason
  
  NullPointerException - if any parameter is null
  
  See Java Language Specification:
  
  12.7 Unloading of Classes and Interfaces
  See Java Virtual Machine Specification:
  
  4.2.1 Binary Class and Interface Names
  4.2.2 Unqualified Names
  4.7.28 The NestHost Attribute
  4.7.29 The NestMembers Attribute
  5.4.3.1 Class and Interface Resolution
  5.4.4 Access Control
  5.3.5 Deriving a Class from a class File Representation
  5.4 Linking
  5.5 Initialization
  
  Since:
  
  16
  
  See Also:
  
  defineHiddenClass(byte[], boolean, ClassOption...)
  
  Class.isHidden()
  
  MethodHandles.classData(Lookup, String, Class)
  
  MethodHandles.classDataAt(Lookup, String, Class, int)
- toString
  public String toString()
  
  Displays the name of the class from which lookups are to be made, followed by "/" and the name of the previous lookup class if present. (The name is the one reported by Class.getName.) If there are restrictions on the access permitted to this lookup, this is indicated by adding a suffix to the class name, consisting of a slash and a keyword. The keyword represents the strongest allowed access, and is chosen as follows:
  
  If no access is allowed, the suffix is "/noaccess".
  If only unconditional access is allowed, the suffix is "/publicLookup".
  If only public access to types in exported packages is allowed, the suffix is "/public".
  If only public and module access are allowed, the suffix is "/module".
  If public and package access are allowed, the suffix is "/package".
  If public, package, and private access are allowed, the suffix is "/private".
  If none of the above cases apply, it is the case that full privilege access (public, module, package, private, and protected) is allowed. In this case, no suffix is added. This is true only of an object obtained originally from MethodHandles.lookup. Objects created by Lookup.in always have restricted access, and will display a suffix.
  (It may seem strange that protected access should be stronger than private access. Viewed independently from package access, protected access is the first to be lost, because it requires a direct subclass relationship between caller and callee.)
  
  Overrides:
  
  toString in class Object
  
  Returns:
  
  a string representation of the object
  
  See Also:
  
  in(java.lang.Class<?>)
- findStatic
  public MethodHandle findStatic(Class<?> refc, String name, MethodType type) throws NoSuchMethodException, IllegalAccessException
  
  Produces a method handle for a static method. The type of the method handle will be that of the method. (Since static methods do not take receivers, there is no additional receiver argument inserted into the method handle type, as there would be with findVirtual or findSpecial.) The method and all its argument types must be accessible to the lookup object.
  The returned method handle will have variable arity if and only if the method's variable arity modifier bit (0x0080) is set.
  If the returned method handle is invoked, the method's class will be initialized, if it has not already been initialized.
  Example:
  
  import static java.lang.invoke.MethodHandles.*; import static java.lang.invoke.MethodType.*; ... MethodHandle MH_asList = publicLookup().findStatic(Arrays.class, "asList", methodType(List.class, Object[].class)); assertEquals("[x, y]", MH_asList.invoke("x", "y").toString());
  
  Parameters:
  
  refc - the class from which the method is accessed
  
  name - the name of the method
  
  type - the type of the method
  
  Returns:
  
  the desired method handle
  
  Throws:
  
  NoSuchMethodException - if the method does not exist
  
  IllegalAccessException - if access checking fails, or if the method is not static, or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
- findVirtual
  public MethodHandle findVirtual(Class<?> refc, String name, MethodType type) throws NoSuchMethodException, IllegalAccessException
  
  Produces a method handle for a virtual method. The type of the method handle will be that of the method, with the receiver type (usually refc) prepended. The method and all its argument types must be accessible to the lookup object.
  When called, the handle will treat the first argument as a receiver and, for non-private methods, dispatch on the receiver's type to determine which method implementation to enter. For private methods the named method in refc will be invoked on the receiver. (The dispatching action is identical with that performed by an invokevirtual or invokeinterface instruction.)
  The first argument will be of type refc if the lookup class has full privileges to access the member. Otherwise the member must be protected and the first argument will be restricted in type to the lookup class.
  The returned method handle will have variable arity if and only if the method's variable arity modifier bit (0x0080) is set.
  Because of the general equivalence between invokevirtual instructions and method handles produced by findVirtual, if the class is MethodHandle and the name string is invokeExact or invoke, the resulting method handle is equivalent to one produced by MethodHandles.exactInvoker or MethodHandles.invoker with the same type argument.
  If the class is VarHandle and the name string corresponds to the name of a signature-polymorphic access mode method, the resulting method handle is equivalent to one produced by MethodHandles.varHandleInvoker(java.lang.invoke.VarHandle.AccessMode, java.lang.invoke.MethodType) with the access mode corresponding to the name string and with the same type arguments.
  Example:
  
  import static java.lang.invoke.MethodHandles.*; import static java.lang.invoke.MethodType.*; ... MethodHandle MH_concat = publicLookup().findVirtual(String.class, "concat", methodType(String.class, String.class)); MethodHandle MH_hashCode = publicLookup().findVirtual(Object.class, "hashCode", methodType(int.class)); MethodHandle MH_hashCode_String = publicLookup().findVirtual(String.class, "hashCode", methodType(int.class)); assertEquals("xy", (String) MH_concat.invokeExact("x", "y")); assertEquals("xy".hashCode(), (int) MH_hashCode.invokeExact((Object)"xy")); assertEquals("xy".hashCode(), (int) MH_hashCode_String.invokeExact("xy")); // interface method: MethodHandle MH_subSequence = publicLookup().findVirtual(CharSequence.class, "subSequence", methodType(CharSequence.class, int.class, int.class)); assertEquals("def", MH_subSequence.invoke("abcdefghi", 3, 6).toString()); // constructor "internal method" must be accessed differently: MethodType MT_newString = methodType(void.class); //()V for new String() try { assertEquals("impossible", lookup() .findVirtual(String.class, "<init>", MT_newString)); } catch (NoSuchMethodException ex) { } // OK MethodHandle MH_newString = publicLookup() .findConstructor(String.class, MT_newString); assertEquals("", (String) MH_newString.invokeExact());
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  name - the name of the method
  
  type - the type of the method, with the receiver argument omitted
  
  Returns:
  
  the desired method handle
  
  Throws:
  
  NoSuchMethodException - if the method does not exist
  
  IllegalAccessException - if access checking fails, or if the method is static, or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
- findConstructor
  public MethodHandle findConstructor(Class<?> refc, MethodType type) throws NoSuchMethodException, IllegalAccessException
  
  Produces a method handle which creates an object and initializes it, using the constructor of the specified type. The parameter types of the method handle will be those of the constructor, while the return type will be a reference to the constructor's class. The constructor and all its argument types must be accessible to the lookup object.
  The requested type must have a return type of void. (This is consistent with the JVM's treatment of constructor type descriptors.)
  The returned method handle will have variable arity if and only if the constructor's variable arity modifier bit (0x0080) is set.
  If the returned method handle is invoked, the constructor's class will be initialized, if it has not already been initialized.
  Example:
  
  import static java.lang.invoke.MethodHandles.*; import static java.lang.invoke.MethodType.*; ... MethodHandle MH_newArrayList = publicLookup().findConstructor( ArrayList.class, methodType(void.class, Collection.class)); Collection orig = Arrays.asList("x", "y"); Collection copy = (ArrayList) MH_newArrayList.invokeExact(orig); assert(orig != copy); assertEquals(orig, copy); // a variable-arity constructor: MethodHandle MH_newProcessBuilder = publicLookup().findConstructor( ProcessBuilder.class, methodType(void.class, String[].class)); ProcessBuilder pb = (ProcessBuilder) MH_newProcessBuilder.invoke("x", "y", "z"); assertEquals("[x, y, z]", pb.command().toString());
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  type - the type of the method, with the receiver argument omitted, and a void return type
  
  Returns:
  
  the desired method handle
  
  Throws:
  
  NoSuchMethodException - if the constructor does not exist
  
  IllegalAccessException - if access checking fails or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
- findClass
  
  public Class<?> findClass(String targetName) throws ClassNotFoundException, IllegalAccessException
  
  Looks up a class by name from the lookup context defined by this Lookup object, as if resolved by an ldc instruction. Such a resolution, as specified in JVMS 5.4.3.1, attempts to locate and load the class, and then determines whether the class is accessible to this lookup object.
  For a class or an interface, the name is the binary name. For an array class of n dimensions, the name begins with n occurrences of '[' and followed by the element type as encoded in the table specified in Class.getName().
  The lookup context here is determined by the lookup class, its class loader, and the lookup modes.
  
  Parameters:
  
  targetName - the binary name of the class or the string representing an array class
  
  Returns:
  
  the requested class.
  
  Throws:
  
  SecurityException - if a security manager is present and it refuses access
  
  LinkageError - if the linkage fails
  
  ClassNotFoundException - if the class cannot be loaded by the lookup class' loader.
  
  IllegalAccessException - if the class is not accessible, using the allowed access modes.
  
  NullPointerException - if targetName is null
  
  See Java Virtual Machine Specification:
  
  5.4.3.1 Class and Interface Resolution
  
  Since:
  
  9
- ensureInitialized
  
  public <T> Class<T> ensureInitialized(Class<T> targetClass) throws IllegalAccessException
  
  Ensures that targetClass has been initialized. The class to be initialized must be accessible to this Lookup object. This method causes targetClass to be initialized if it has not been already initialized, as specified in JVMS 5.5.
  This method returns when targetClass is fully initialized, or when targetClass is being initialized by the current thread.
  
  Type Parameters:
  
  T - the type of the class to be initialized
  
  Parameters:
  
  targetClass - the class to be initialized
  
  Returns:
  
  targetClass that has been initialized, or that is being initialized by the current thread.
  
  Throws:
  
  IllegalArgumentException - if targetClass is a primitive type or void or array class
  
  IllegalAccessException - if targetClass is not accessible to this lookup
  
  ExceptionInInitializerError - if the class initialization provoked by this method fails
  
  SecurityException - if a security manager is present and it refuses access
  
  See Java Virtual Machine Specification:
  
  5.5 Initialization
  
  Since:
  
  15
- accessClass
  public <T> Class<T> accessClass(Class<T> targetClass) throws IllegalAccessException
  
  Determines if a class can be accessed from the lookup context defined by this Lookup object. The static initializer of the class is not run. If targetClass is an array class, targetClass is accessible if the element type of the array class is accessible. Otherwise, targetClass is determined as accessible as follows.
  If targetClass is in the same module as the lookup class, the lookup class is LC in module M1 and the previous lookup class is in module M0 or null if not present, targetClass is accessible if and only if one of the following is true:
  
  If this lookup has PRIVATE access, targetClass is LC or other class in the same nest of LC.
  
  If this lookup has PACKAGE access, targetClass is in the same runtime package of LC.
  
  If this lookup has MODULE access, targetClass is a public type in M1.
  
  If this lookup has PUBLIC access, targetClass is a public type in a package exported by M1 to at least M0 if the previous lookup class is present; otherwise, targetClass is a public type in a package exported by M1 unconditionally.
  
  Otherwise, if this lookup has UNCONDITIONAL access, this lookup can access public types in all modules when the type is in a package that is exported unconditionally.
  Otherwise, targetClass is in a different module from lookupClass, and if this lookup does not have PUBLIC access, lookupClass is inaccessible.
  Otherwise, if this lookup has no previous lookup class, M1 is the module containing lookupClass and M2 is the module containing targetClass, then targetClass is accessible if and only if
  
  M1 reads M2, and
  targetClass is public and in a package exported by M2 at least to M1.
  
  Otherwise, if this lookup has a previous lookup class, M1 and M2 are as before, and M0 is the module containing the previous lookup class, then targetClass is accessible if and only if one of the following is true:
  
  targetClass is in M0 and M1 reads M0 and the type is in a package that is exported to at least M1.
  targetClass is in M1 and M0 reads M1 and the type is in a package that is exported to at least M0.
  targetClass is in a third module M2 and both M0 and M1 reads M2 and the type is in a package that is exported to at least both M0 and M2.
  
  Otherwise, targetClass is not accessible.
  
  Type Parameters:
  
  T - the type of the class to be access-checked
  
  Parameters:
  
  targetClass - the class to be access-checked
  
  Returns:
  
  targetClass that has been access-checked
  
  Throws:
  
  IllegalAccessException - if the class is not accessible from the lookup class and previous lookup class, if present, using the allowed access modes.
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if targetClass is null
  
  Since:
  
  9
  
  See Also:
  
  Cross-module lookups
- findSpecial
  public MethodHandle findSpecial(Class<?> refc, String name, MethodType type, Class<?> specialCaller) throws NoSuchMethodException, IllegalAccessException
  
  Produces an early-bound method handle for a virtual method. It will bypass checks for overriding methods on the receiver, as if called from an invokespecial instruction from within the explicitly specified specialCaller. The type of the method handle will be that of the method, with a suitably restricted receiver type prepended. (The receiver type will be specialCaller or a subtype.) The method and all its argument types must be accessible to the lookup object.
  Before method resolution, if the explicitly specified caller class is not identical with the lookup class, or if this lookup object does not have private access privileges, the access fails.
  The returned method handle will have variable arity if and only if the method's variable arity modifier bit (0x0080) is set.
  (Note: JVM internal methods named "<init>" are not visible to this API, even though the invokespecial instruction can refer to them in special circumstances. Use findConstructor to access instance initialization methods in a safe manner.)
  Example:
  
  import static java.lang.invoke.MethodHandles.*; import static java.lang.invoke.MethodType.*; ... static class Listie extends ArrayList { public String toString() { return "[wee Listie]"; } static Lookup lookup() { return MethodHandles.lookup(); } } ... // no access to constructor via invokeSpecial: MethodHandle MH_newListie = Listie.lookup() .findConstructor(Listie.class, methodType(void.class)); Listie l = (Listie) MH_newListie.invokeExact(); try { assertEquals("impossible", Listie.lookup().findSpecial( Listie.class, "<init>", methodType(void.class), Listie.class)); } catch (NoSuchMethodException ex) { } // OK // access to super and self methods via invokeSpecial: MethodHandle MH_super = Listie.lookup().findSpecial( ArrayList.class, "toString" , methodType(String.class), Listie.class); MethodHandle MH_this = Listie.lookup().findSpecial( Listie.class, "toString" , methodType(String.class), Listie.class); MethodHandle MH_duper = Listie.lookup().findSpecial( Object.class, "toString" , methodType(String.class), Listie.class); assertEquals("[]", (String) MH_super.invokeExact(l)); assertEquals(""+l, (String) MH_this.invokeExact(l)); assertEquals("[]", (String) MH_duper.invokeExact(l)); // ArrayList method try { assertEquals("inaccessible", Listie.lookup().findSpecial( String.class, "toString", methodType(String.class), Listie.class)); } catch (IllegalAccessException ex) { } // OK Listie subl = new Listie() { public String toString() { return "[subclass]"; } }; assertEquals(""+l, (String) MH_this.invokeExact(subl)); // Listie method
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  name - the name of the method (which must not be "<init>")
  
  type - the type of the method, with the receiver argument omitted
  
  specialCaller - the proposed calling class to perform the invokespecial
  
  Returns:
  
  the desired method handle
  
  Throws:
  
  NoSuchMethodException - if the method does not exist
  
  IllegalAccessException - if access checking fails, or if the method is static, or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
- findGetter
  public MethodHandle findGetter(Class<?> refc, String name, Class<?> type) throws NoSuchFieldException, IllegalAccessException
  
  Produces a method handle giving read access to a non-static field. The type of the method handle will have a return type of the field's value type. The method handle's single argument will be the instance containing the field. Access checking is performed immediately on behalf of the lookup class.
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  name - the field's name
  
  type - the field's type
  
  Returns:
  
  a method handle which can load values from the field
  
  Throws:
  
  NoSuchFieldException - if the field does not exist
  
  IllegalAccessException - if access checking fails, or if the field is static
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
  
  See Also:
  
  findVarHandle(Class, String, Class)
- findSetter
  public MethodHandle findSetter(Class<?> refc, String name, Class<?> type) throws NoSuchFieldException, IllegalAccessException
  
  Produces a method handle giving write access to a non-static field. The type of the method handle will have a void return type. The method handle will take two arguments, the instance containing the field, and the value to be stored. The second argument will be of the field's value type. Access checking is performed immediately on behalf of the lookup class.
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  name - the field's name
  
  type - the field's type
  
  Returns:
  
  a method handle which can store values into the field
  
  Throws:
  
  NoSuchFieldException - if the field does not exist
  
  IllegalAccessException - if access checking fails, or if the field is static or final
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
  
  See Also:
  
  findVarHandle(Class, String, Class)
- findVarHandle
  public VarHandle findVarHandle(Class<?> recv, String name, Class<?> type) throws NoSuchFieldException, IllegalAccessException
  
  Produces a VarHandle giving access to a non-static field name of type type declared in a class of type recv. The VarHandle's variable type is type and it has one coordinate type, recv.
  Access checking is performed immediately on behalf of the lookup class.
  Certain access modes of the returned VarHandle are unsupported under the following conditions:
  
  if the field is declared final, then the write, atomic update, numeric atomic update, and bitwise atomic update access modes are unsupported.
  if the field type is anything other than byte, short, char, int, long, float, or double then numeric atomic update access modes are unsupported.
  if the field type is anything other than boolean, byte, short, char, int or long then bitwise atomic update access modes are unsupported.
  
  If the field is declared volatile then the returned VarHandle will override access to the field (effectively ignore the volatile declaration) in accordance to its specified access modes.
  If the field type is float or double then numeric and atomic update access modes compare values using their bitwise representation (see Float.floatToRawIntBits(float) and Double.doubleToRawLongBits(double), respectively).
  
  API Note:
  
  Bitwise comparison of float values or double values, as performed by the numeric and atomic update access modes, differ from the primitive == operator and the Float.equals(java.lang.Object) and Double.equals(java.lang.Object) methods, specifically with respect to comparing NaN values or comparing -0.0 with +0.0. Care should be taken when performing a compare and set or a compare and exchange operation with such values since the operation may unexpectedly fail. There are many possible NaN values that are considered to be NaN in Java, although no IEEE 754 floating-point operation provided by Java can distinguish between them. Operation failure can occur if the expected or witness value is a NaN value and it is transformed (perhaps in a platform specific manner) into another NaN value, and thus has a different bitwise representation (see Float.intBitsToFloat(int) or Double.longBitsToDouble(long) for more details). The values -0.0 and +0.0 have different bitwise representations but are considered equal when using the primitive == operator. Operation failure can occur if, for example, a numeric algorithm computes an expected value to be say -0.0 and previously computed the witness value to be say +0.0.
  
  Parameters:
  
  recv - the receiver class, of type R, that declares the non-static field
  
  name - the field's name
  
  type - the field's type, of type T
  
  Returns:
  
  a VarHandle giving access to non-static fields.
  
  Throws:
  
  NoSuchFieldException - if the field does not exist
  
  IllegalAccessException - if access checking fails, or if the field is static
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
  
  Since:
  
  9
- findStaticGetter
  
  public MethodHandle findStaticGetter(Class<?> refc, String name, Class<?> type) throws NoSuchFieldException, IllegalAccessException
  
  Produces a method handle giving read access to a static field. The type of the method handle will have a return type of the field's value type. The method handle will take no arguments. Access checking is performed immediately on behalf of the lookup class.
  If the returned method handle is invoked, the field's class will be initialized, if it has not already been initialized.
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  name - the field's name
  
  type - the field's type
  
  Returns:
  
  a method handle which can load values from the field
  
  Throws:
  
  NoSuchFieldException - if the field does not exist
  
  IllegalAccessException - if access checking fails, or if the field is not static
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
- findStaticSetter
  
  public MethodHandle findStaticSetter(Class<?> refc, String name, Class<?> type) throws NoSuchFieldException, IllegalAccessException
  
  Produces a method handle giving write access to a static field. The type of the method handle will have a void return type. The method handle will take a single argument, of the field's value type, the value to be stored. Access checking is performed immediately on behalf of the lookup class.
  If the returned method handle is invoked, the field's class will be initialized, if it has not already been initialized.
  
  Parameters:
  
  refc - the class or interface from which the method is accessed
  
  name - the field's name
  
  type - the field's type
  
  Returns:
  
  a method handle which can store values into the field
  
  Throws:
  
  NoSuchFieldException - if the field does not exist
  
  IllegalAccessException - if access checking fails, or if the field is not static or is final
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
- findStaticVarHandle
  public VarHandle findStaticVarHandle(Class<?> decl, String name, Class<?> type) throws NoSuchFieldException, IllegalAccessException
  
  Produces a VarHandle giving access to a static field name of type type declared in a class of type decl. The VarHandle's variable type is type and it has no coordinate types.
  Access checking is performed immediately on behalf of the lookup class.
  If the returned VarHandle is operated on, the declaring class will be initialized, if it has not already been initialized.
  Certain access modes of the returned VarHandle are unsupported under the following conditions:
  
  if the field is declared final, then the write, atomic update, numeric atomic update, and bitwise atomic update access modes are unsupported.
  if the field type is anything other than byte, short, char, int, long, float, or double, then numeric atomic update access modes are unsupported.
  if the field type is anything other than boolean, byte, short, char, int or long then bitwise atomic update access modes are unsupported.
  
  If the field is declared volatile then the returned VarHandle will override access to the field (effectively ignore the volatile declaration) in accordance to its specified access modes.
  If the field type is float or double then numeric and atomic update access modes compare values using their bitwise representation (see Float.floatToRawIntBits(float) and Double.doubleToRawLongBits(double), respectively).
  
  API Note:
  
  Bitwise comparison of float values or double values, as performed by the numeric and atomic update access modes, differ from the primitive == operator and the Float.equals(java.lang.Object) and Double.equals(java.lang.Object) methods, specifically with respect to comparing NaN values or comparing -0.0 with +0.0. Care should be taken when performing a compare and set or a compare and exchange operation with such values since the operation may unexpectedly fail. There are many possible NaN values that are considered to be NaN in Java, although no IEEE 754 floating-point operation provided by Java can distinguish between them. Operation failure can occur if the expected or witness value is a NaN value and it is transformed (perhaps in a platform specific manner) into another NaN value, and thus has a different bitwise representation (see Float.intBitsToFloat(int) or Double.longBitsToDouble(long) for more details). The values -0.0 and +0.0 have different bitwise representations but are considered equal when using the primitive == operator. Operation failure can occur if, for example, a numeric algorithm computes an expected value to be say -0.0 and previously computed the witness value to be say +0.0.
  
  Parameters:
  
  decl - the class that declares the static field
  
  name - the field's name
  
  type - the field's type, of type T
  
  Returns:
  
  a VarHandle giving access to a static field
  
  Throws:
  
  NoSuchFieldException - if the field does not exist
  
  IllegalAccessException - if access checking fails, or if the field is not static
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
  
  Since:
  
  9
- bind
  public MethodHandle bind(Object receiver, String name, MethodType type) throws NoSuchMethodException, IllegalAccessException
  
  Produces an early-bound method handle for a non-static method. The receiver must have a supertype defc in which a method of the given name and type is accessible to the lookup class. The method and all its argument types must be accessible to the lookup object. The type of the method handle will be that of the method, without any insertion of an additional receiver parameter. The given receiver will be bound into the method handle, so that every call to the method handle will invoke the requested method on the given receiver.
  The returned method handle will have variable arity if and only if the method's variable arity modifier bit (0x0080) is set and the trailing array argument is not the only argument. (If the trailing array argument is the only argument, the given receiver value will be bound to it.)
  This is almost equivalent to the following code, with some differences noted below:
  
  import static java.lang.invoke.MethodHandles.*; import static java.lang.invoke.MethodType.*; ... MethodHandle mh0 = lookup().findVirtual(defc, name, type); MethodHandle mh1 = mh0.bindTo(receiver); mh1 = mh1.withVarargs(mh0.isVarargsCollector()); return mh1;
  
  where defc is either receiver.getClass() or a super type of that class, in which the requested method is accessible to the lookup class. (Unlike bind, bindTo does not preserve variable arity. Also, bindTo may throw a ClassCastException in instances where bind would throw an IllegalAccessException, as in the case where the member is protected and the receiver is restricted by findVirtual to the lookup class.)
  
  Parameters:
  
  receiver - the object from which the method is accessed
  
  name - the name of the method
  
  type - the type of the method, with the receiver argument omitted
  
  Returns:
  
  the desired method handle
  
  Throws:
  
  NoSuchMethodException - if the method does not exist
  
  IllegalAccessException - if access checking fails or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  SecurityException - if a security manager is present and it refuses access
  
  NullPointerException - if any argument is null
  
  See Also:
  
  MethodHandle.bindTo(java.lang.Object)
  
  findVirtual(java.lang.Class<?>, java.lang.String, java.lang.invoke.MethodType)
- unreflect
  
  public MethodHandle unreflect(Method m) throws IllegalAccessException
  
  Makes a direct method handle to m, if the lookup class has permission. If m is non-static, the receiver argument is treated as an initial argument. If m is virtual, overriding is respected on every call. Unlike the Core Reflection API, exceptions are not wrapped. The type of the method handle will be that of the method, with the receiver type prepended (but only if it is non-static). If the method's accessible flag is not set, access checking is performed immediately on behalf of the lookup class. If m is not public, do not share the resulting handle with untrusted parties.
  The returned method handle will have variable arity if and only if the method's variable arity modifier bit (0x0080) is set.
  If m is static, and if the returned method handle is invoked, the method's class will be initialized, if it has not already been initialized.
  
  Parameters:
  
  m - the reflected method
  
  Returns:
  
  a method handle which can invoke the reflected method
  
  Throws:
  
  IllegalAccessException - if access checking fails or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  NullPointerException - if the argument is null
- unreflectSpecial
  
  public MethodHandle unreflectSpecial(Method m, Class<?> specialCaller) throws IllegalAccessException
  
  Produces a method handle for a reflected method. It will bypass checks for overriding methods on the receiver, as if called from an invokespecial instruction from within the explicitly specified specialCaller. The type of the method handle will be that of the method, with a suitably restricted receiver type prepended. (The receiver type will be specialCaller or a subtype.) If the method's accessible flag is not set, access checking is performed immediately on behalf of the lookup class, as if invokespecial instruction were being linked.
  Before method resolution, if the explicitly specified caller class is not identical with the lookup class, or if this lookup object does not have private access privileges, the access fails.
  The returned method handle will have variable arity if and only if the method's variable arity modifier bit (0x0080) is set.
  
  Parameters:
  
  m - the reflected method
  
  specialCaller - the class nominally calling the method
  
  Returns:
  
  a method handle which can invoke the reflected method
  
  Throws:
  
  IllegalAccessException - if access checking fails, or if the method is static, or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  NullPointerException - if any argument is null
- unreflectConstructor
  
  public MethodHandle unreflectConstructor(Constructor<?> c) throws IllegalAccessException
  
  Produces a method handle for a reflected constructor. The type of the method handle will be that of the constructor, with the return type changed to the declaring class. The method handle will perform a newInstance operation, creating a new instance of the constructor's class on the arguments passed to the method handle.
  If the constructor's accessible flag is not set, access checking is performed immediately on behalf of the lookup class.
  The returned method handle will have variable arity if and only if the constructor's variable arity modifier bit (0x0080) is set.
  If the returned method handle is invoked, the constructor's class will be initialized, if it has not already been initialized.
  
  Parameters:
  
  c - the reflected constructor
  
  Returns:
  
  a method handle which can invoke the reflected constructor
  
  Throws:
  
  IllegalAccessException - if access checking fails or if the method's variable arity modifier bit is set and asVarargsCollector fails
  
  NullPointerException - if the argument is null
- unreflectGetter
  
  public MethodHandle unreflectGetter(Field f) throws IllegalAccessException
  
  Produces a method handle giving read access to a reflected field. The type of the method handle will have a return type of the field's value type. If the field is static, the method handle will take no arguments. Otherwise, its single argument will be the instance containing the field. If the Field object's accessible flag is not set, access checking is performed immediately on behalf of the lookup class.
  If the field is static, and if the returned method handle is invoked, the field's class will be initialized, if it has not already been initialized.
  
  Parameters:
  
  f - the reflected field
  
  Returns:
  
  a method handle which can load values from the reflected field
  
  Throws:
  
  IllegalAccessException - if access checking fails
  
  NullPointerException - if the argument is null
- unreflectSetter
  
  public MethodHandle unreflectSetter(Field f) throws IllegalAccessException
  
  Produces a method handle giving write access to a reflected field. The type of the method handle will have a void return type. If the field is static, the method handle will take a single argument, of the field's value type, the value to be stored. Otherwise, the two arguments will be the instance containing the field, and the value to be stored. If the Field object's accessible flag is not set, access checking is performed immediately on behalf of the lookup class.
  If the field is final, write access will not be allowed and access checking will fail, except under certain narrow circumstances documented for Field.set. A method handle is returned only if a corresponding call to the Field object's set method could return normally. In particular, fields which are both static and final may never be set.
  If the field is static, and if the returned method handle is invoked, the field's class will be initialized, if it has not already been initialized.
  
  Parameters:
  
  f - the reflected field
  
  Returns:
  
  a method handle which can store values into the reflected field
  
  Throws:
  
  IllegalAccessException - if access checking fails, or if the field is final and write access is not enabled on the Field object
  
  NullPointerException - if the argument is null
- unreflectVarHandle
  public VarHandle unreflectVarHandle(Field f) throws IllegalAccessException
  
  Produces a VarHandle giving access to a reflected field f of type T declared in a class of type R. The VarHandle's variable type is T. If the field is non-static the VarHandle has one coordinate type, R. Otherwise, the field is static, and the VarHandle has no coordinate types.
  Access checking is performed immediately on behalf of the lookup class, regardless of the value of the field's accessible flag.
  If the field is static, and if the returned VarHandle is operated on, the field's declaring class will be initialized, if it has not already been initialized.
  Certain access modes of the returned VarHandle are unsupported under the following conditions:
  
  if the field is declared final, then the write, atomic update, numeric atomic update, and bitwise atomic update access modes are unsupported.
  if the field type is anything other than byte, short, char, int, long, float, or double then numeric atomic update access modes are unsupported.
  if the field type is anything other than boolean, byte, short, char, int or long then bitwise atomic update access modes are unsupported.
  
  If the field is declared volatile then the returned VarHandle will override access to the field (effectively ignore the volatile declaration) in accordance to its specified access modes.
  If the field type is float or double then numeric and atomic update access modes compare values using their bitwise representation (see Float.floatToRawIntBits(float) and Double.doubleToRawLongBits(double), respectively).
  
  API Note:
  
  Bitwise comparison of float values or double values, as performed by the numeric and atomic update access modes, differ from the primitive == operator and the Float.equals(java.lang.Object) and Double.equals(java.lang.Object) methods, specifically with respect to comparing NaN values or comparing -0.0 with +0.0. Care should be taken when performing a compare and set or a compare and exchange operation with such values since the operation may unexpectedly fail. There are many possible NaN values that are considered to be NaN in Java, although no IEEE 754 floating-point operation provided by Java can distinguish between them. Operation failure can occur if the expected or witness value is a NaN value and it is transformed (perhaps in a platform specific manner) into another NaN value, and thus has a different bitwise representation (see Float.intBitsToFloat(int) or Double.longBitsToDouble(long) for more details). The values -0.0 and +0.0 have different bitwise representations but are considered equal when using the primitive == operator. Operation failure can occur if, for example, a numeric algorithm computes an expected value to be say -0.0 and previously computed the witness value to be say +0.0.
  
  Parameters:
  
  f - the reflected field, with a field of type T, and a declaring class of type R
  
  Returns:
  
  a VarHandle giving access to non-static fields or a static field
  
  Throws:
  
  IllegalAccessException - if access checking fails
  
  NullPointerException - if the argument is null
  
  Since:
  
  9
- revealDirect
  public MethodHandleInfo revealDirect(MethodHandle target)
  
  Cracks a direct method handle created by this lookup object or a similar one. Security and access checks are performed to ensure that this lookup object is capable of reproducing the target method handle. This means that the cracking may fail if target is a direct method handle but was created by an unrelated lookup object. This can happen if the method handle is caller sensitive and was created by a lookup object for a different class.
  
  Parameters:
  
  target - a direct method handle to crack into symbolic reference components
  
  Returns:
  
  a symbolic reference which can be used to reconstruct this method handle from this lookup object
  
  Throws:
  
  SecurityException - if a security manager is present and it refuses access
  
  IllegalArgumentException - if the target is not a direct method handle or if access checking fails
  
  NullPointerException - if the target is null
  
  Since:
  
  1.8
  
  See Also:
  
  MethodHandleInfo
- hasPrivateAccess
  
  @Deprecated(since="14") public boolean hasPrivateAccess()
  
  Deprecated.
  This method was originally designed to test PRIVATE access that implies full privilege access but MODULE access has since become independent of PRIVATE access. It is recommended to call hasFullPrivilegeAccess() instead.
  
  Returns true if this lookup has PRIVATE and MODULE access.
  
  Returns:
  
  true if this lookup has PRIVATE and MODULE access.
  
  Since:
  
  9
- hasFullPrivilegeAccess
  public boolean hasFullPrivilegeAccess()
  
  Returns true if this lookup has full privilege access, i.e. PRIVATE and MODULE access. A Lookup object must have full privilege access in order to access all members that are allowed to the lookup class.
  
  Returns:
  
  true if this lookup has full privilege access.
  
  Since:
  
  14
  
  See Also:
  
  private and module access

Class MethodHandles.Lookup

Lookup Factory Methods

Access checking

Cross-module lookups

Cross-module access checks

Access modes

Security manager interactions

Caller sensitive methods

Nested Class Summary

Field Summary

Method Summary

Methods declared in class java.lang.Object

Field Details

PUBLIC

PRIVATE

PROTECTED

PACKAGE

MODULE

UNCONDITIONAL

ORIGINAL

Method Details

lookupClass

previousLookupClass

lookupModes

in

dropLookupMode

defineClass

defineHiddenClass

defineHiddenClassWithClassData

toString

findStatic

findVirtual

findConstructor

findClass

ensureInitialized

accessClass

findSpecial

findGetter

findSetter

findVarHandle

findStaticGetter

findStaticSetter

findStaticVarHandle

bind

unreflect

unreflectSpecial

unreflectConstructor

unreflectGetter

unreflectSetter

unreflectVarHandle

revealDirect

hasPrivateAccess

hasFullPrivilegeAccess